Producer of bio-oils and plastic lubricants
ECOGEAR SYNTH
ECOGEAR SYNT gear oils are used whenever mineral gear oils have reached their performance limit and can no longer meet the application requirements; for example, at very low or high temperatures, extremely high loads, extraordinary ambient conditions, or if they fail to meet special requirements such as flammability. ECOGEAR SYNTH can offer you following application advantages:
- improved efficiency due to reduced tooth-related friction losses
- lower gearing losses due to reduced friction, requiring less energy
- oil change intervals 4 to 5 times longer than mineral oils operating at the same temperature
- reduced operating temperatures under full load, increasing component life
- cooling systems may not be required
| Test method | Unit | Ecogear Synth 100 | Ecogear Synth 150 | Ecogear Synth 220 | Ecogear Synth 320 | |
|---|---|---|---|---|---|---|
| Viscosity at 40 °C | ISO 3104 | mm2/s | 100 | 150 | 220 | 320 |
|
Viscosity at 100 °C |
ISO 3104 | mm2/s | 16 | 23 | 31 | 40 |
| Viscosity index | ISO 2909 | - | >170 | >170 | >170 |
>170 |
| Acid number | ISO 6619 | mg KOH/g | <1,5 | <1,5 | <1,5 | <1,5 |
| Mass fraction of water | ISO 12937 | mg/kg | 930 | 880 | 860 | 910 |
| Pour point | ISO 3016 | °C | <-25 | <-25 | <-25 | <-20 |
| Flash point | ISO 2592 | °C | >240 | >240 | >240 | >240 |
| Foaming tendency/stability | ISO 6247 | ml/ml | ||||
|
Sequence I at 24°C |
0/0 0/0 0/0 |
0/0 0/0 0/0 |
0/0 0/0 0/0 |
0/0 0/0 0/0 |
||
| Oxidation stability Petrooxy | ASTM D7545 | min | >700 | >700 | >700 | >700 |
| Elements content - sulphur | ASTM D6481 | mg/kg | 3523 | 3451 | 3470 | 3424 |
| Elements content - phosphorus | ASTM D6481 | mg/kg | 219 | 191 | 199 | 22 |
| Density at 15°C | ISO 12185 | g/cm3 | 0,950 - 0,970 | 0,950 - 0,970 | 0,950 - 0,970 | 0,950 - 0,970 |
